Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

stripped exhaust manifold bolt 200

posted by  starsandbars on  Wed Jul 17 12:44 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Apr 24 20:55 CST 2014
[RELATED]

I put a 90+ manifold on my 1983 242. A previous owner broke off about 1/4 of an inch off three of the studs. Two of the three studs took lock nuts to full torque value. The last of the three studs have pretty mangled threads and stripped when I tried to torque it down. I will pull the manifold off and address the stud. Is there a safe way to remove the stud?

Thanks
--
1983 242 GLT / 1991 244 / 1993 245 / 1999 v70






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 stripped exhaust manifold bolt [200]
posted by  starsandbars  on Wed Jul 17 12:44 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.