Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

copper gasket size 200 1982

posted by  someone claiming to be CB on  Sat Sep 28 21:19 CST 2013 [RELATED]

FWIW

those copper washers that are used with fuel filter and the fuel pump connections are very "crushable" they are very different from the copper washers that are not meant for this particular sealing purpose.

For instance, if you buy a fuel filter ...like one made by Wix...they come with a set those washers as part of the package.

With K-Jet FI system, where the pressure is much higher that later LH systems, the proper washers are even more crucial.

If you just need the washers, I have had success in getting them from an Independent shop that works on Volvos/BMW/Mercedes. You need to get the washers used in high pressure FI systems.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New getting the main fuel pump assembly apart [200][1982]
posted by  muskox37  on Sun Sep 22 15:00 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.