Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Questions about 940 intake gasket replacement 900 1994

posted by  Mike91 on  Wed Jan 15 18:30 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 17 19:52 CST 2014
[RELATED]

The intake manifold gasket on my 1994 940 NA is leaking at the #1 intake port. I have never replaced the intake gasket on a B230F and have some questions:

1. Do I have to remove anything other than the intake manifold nuts ? I am hoping the manifold will slide far enough away from the studs without disconnecting fuel lines, etc.

2. Is the factory original gasket made out of metal or some other material ?

3. What is a good manufacturer for the intake manifold gasket ? I see that FCP sells Elring. Local Advance Auto and Auto Zone stores have a FelPro gasket in stock.

Thanks,

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Questions about 940 intake gasket replacement [900][1994]
posted by  Mike91  on Wed Jan 15 18:30 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.