Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2011 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Questions about 940 intake gasket replacement 900 1994

posted by  The Rod on  Thu Jan 16 09:09 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 12:15 CST 2014
[RELATED]

IMHO the Felpro is a superior gasket. Just seemed to fit better and made of a slightly better cardboard. And yes if you have an EGR you will need to take off the two 9 or 10mm bolts that attach the tube to the top of the Manifold.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Questions about 940 intake gasket replacement [900][1994]
posted by  Mike91  on Wed Jan 15 18:30 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.