Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2008 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Towing an automatic trans with a tow dolly? 140-160

uid 779's pic
posted by  matt b on  Tue Jul 22 22:55 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 16:33 CST 2014
[RELATED]

It's only 4 bolts... Bring a 7/16, 1/2, and 9/16 wrench. And the metric equivalents.. 11, 12, 13, 14, 15mm. And some rope or bailing wire.

Once you got 'er on the dolly, you can tow it out of the yard it's in. Pull over, and remove driveshaft at the axle. It'll be high enough to get under there...

Then tie it up tight and out of the way of the spinning differential flange with the rope you brought and bring 'er home safely.

--
-Matt I ♥ my ♂






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Towing an automatic trans with a tow dolly? [140-160]
posted by  Woodstock subscriber  on Tue Jul 22 20:01 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.