Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Idle Problem Diagnosis 200 1991

posted by  UlisKeeper on  Thu Apr 13 09:31 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 10:50 CST 2014
[RELATED]

SUCCESS. O2 sensor installed and now getting readings varying across the full range. No codes and smooth idle with 50+ miles since sensor installed. Thanks to all! FWIW, I used the shorter 02 socket from the loaner set at AUTOZONE. The had one with the handle attached, but it looked wimpy, so opted for the set with three sockets instead. Sprayed PB blaster two days before and heated with MAP guess for a minute or so to break it free,then applied Kroil and rocked it back and forth applying more Kroil. It came out fine with no need to chase the threads before installing the new one.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Idle Problem Diagnosis [200][1991]
posted by  UlisKeeper  on Wed Apr 5 06:07 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.