Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2023 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Connecting Cat. Converter to Front Muffler 900 1996

posted by  spook on  Fri Jun 16 15:49 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:06 CST 2014
[RELATED]

Dear analogdad,

Hope you're well. I'll leverage AIW's suggestion. I'd use stainless steel bolts and nuts to secure the clamp. Standard steel bolts will soon rust to the point that they are "corrosion-bonded". Stainless bolts and nuts should last far longer.

It might be useful, if there's still an exhaust leak, to apply some muffler cement to the sealing surfaces, before you bolt-up. An example: https://www.amazon.com/Dynomax-35958-Hardware-Muffler-Cement/dp/B000CQHVLI .

Hope this helps.

Yours faithfully,

Spook






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Connecting Cat. Converter to Front Muffler [900][1996]
posted by  analogdad  on Fri Jun 16 11:10 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.