Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake line fittings 140-160 1973

posted by  planetman on  Tue Jun 19 20:21 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

3/16" brake lines with inverted brake flares.

The fittings are SAE with 3/8" x 24 tpi threads.

The fitting at the brake hoses are female while the fittings at the calipers are male.

You are not going to find drop in brake lines from any regular auto parts store.


You can make your own new lines if you are handy with a brake flaring tool or I can supply you with new lines with the correct fittings already installed for about $15.00 per side plus shipping.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake line fittings [140-160][1973]
posted by  GrandpaDan  on Tue Jun 19 19:52 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.