Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2018 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

2.2 runs fine until engine gets hot 200 1988

posted by  machine man on  Sat Aug 24 14:17 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:40 CST 2014
[RELATED]

Hi Dave and Art,

I was going to post earlier but I got way laid by the wife to go garage sale shopping.

I was going to add to use a piece of thin “Sharan” wrap under the reservoir cap to seal of the incoming air into that bottle that can come through the cap.
The only amount of coolant I get is right upon the initial extraction of the sensor from mostly it being wet. As I remember nothing ever hit the floor as I stared back into the hole. It’s amazingly small and deep in there.
That makes it pretty hard to start gulping fast down there with the pressures of equilibrium effect going on.

Nice chart there Art, with the voltages on it. I will be saving that one!

Phil





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2.2 runs fine until engine gets hot [200][1988]
posted by  Burco subscriber  on Fri Aug 23 04:20 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.