Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2020 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 OBD 2-3-2 and 1-1-3 after replacing head gasket 900 1993

posted by  chrisbradberry on  Sat Mar 7 21:26 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 8 13:56 CST 2009
[RELATED]

1993 940 w/300K. Replaced head gasket and all associated gaskets (first time this has been done). Was running okay before. Afterwards idle is rough, mainly when cold, and check engine light comes on after a while (ODB codes 2-3-2 and 1-1-3). After clearing codes they later come back. Replaced O2 sensor - no change. Cleaned the AMM, air intake system, and ICV - no change.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 940 OBD 2-3-2 and 1-1-3 after replacing head gasket [900][1993]
posted by  chrisbradberry  on Sat Mar 7 21:26 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.