Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

crankshaft housing cover 700

posted by  Volvo From Heck on  Thu Aug 6 08:25 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

Secure the gasket to the housing and then trim off the extra length. I use a little smear of sealant where the housing + gasket meet the oil pan. What do you mean - "there's no oil pan gasket there" ??? -- of course there is, unless it got ripped away when you removed the housing. If none is there and the motor is still in the car you will have to cut an new section and glue/seal it into place. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 crankshaft housing cover [700]
posted by  vp965  on Wed Aug 5 20:22 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.