Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

crankshaft housing cover 700

posted by  Volvo From Heck on  Thu Aug 6 08:35 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

Glue/seal the gasket to the housing and trim off the extra length. I use a dab of sealant where the bottom of the housing meets the oil pan. What do you mean -- "there's no gasket there" ??? -- of course there is--or it got ripped away taking off the housing. If none--cut a new section and glue/seal it into place. If the motor is out of the car--remove the pan and replace the entire gasket after bolting the timing cover into place. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 crankshaft housing cover [700]
posted by  vp965  on Wed Aug 5 20:22 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.