|
questions about the wire connector.
1. do you know the color of the wires (assuming it's a 2-wire connector)?
2. you're saying to get the pigtail, correct?
The connector is already present in your car. You disconnect the neutral safety switch, aka the start inhibitor, before removing the AT and put a jumper wire between the two terminals on that connector.
I think Matthew is saying grab that jumper wire from the donor car so you don't have to fashion one yourself. It's just a piece of wire that makes a U shape when installed. You can't miss it unless it's already been removed which is unlikely.
It should be easy enough to make one, though.
--
'80 DL 2 door, '89 DL Wagon, '15 XC70 T6 AWD
|