|
Mitch,
I have the programming instructions for 97 960 Sedan remote controls. I don't know if they're the same for yours but I've pasted them below for you to try. One thing to note if you program a new remote you have to program the old ones as well.
New transmitters (max. 4) must be programmed to function with your alarm system. To do this:
• Make sure all doors, hood and trunk/tailgate are closed.
• Turn the ignition on and off 5 times within 10 seconds. On the fifth try, leave the ignition on.
• Press either button on the transmitter.
NOTE: The first transmitter must be programmed within 15 seconds, the others within 10 second intervals. When the alarm system accepts the codes from each transmitter, the LED on the dash will glow steadily for several seconds.
• Switch the ignition off and test the transmitter(s).
Rick Young
97 960 Sedan 70K
|