Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

ignition fried? 700

posted by  someone claiming to be slovo on  Sun Mar 14 19:21 CST 2004 [RELATED]

Still can't get spark on my '88 760 turbo. When cranking the car the tach needle only jumps up once and then stays still. It appears(if I am actually using the correct wires) that the ECU isn't getting a signal from the hall sensor. They haynes/chiltons manuals say different things so I am not sure if I am using the right wires. When bypassing the hall sensor wires with a new shielded wire to the ECU the car still had no spark. The coil has power but there is still no spark at it. What else should I check? The ICU? where is the ICU.. where it is shown in haynes/chiltons there is nothing.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ignition fried? 700

posted by  Steve on  Mon Mar 15 01:28 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

How do you know the Hall sensor is functional?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.