Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2003 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Transmission pan gasket 700

posted by  Joebrick on  Fri Jul 16 06:39 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 25 02:53 CST 2009
[RELATED]

A question for those that have changed a transmission pan gasket on an AW70. My cork gasket is leaking like a sieve and I am changing to the black rubber or butyl type of gasket. Have any of you used a gasket sealer on that type of gasket? or do I install it dry?

This is something I don't want to do a third time.

Thanks for your help.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Transmission pan gasket 700

    posted by  Kane on  Fri Jul 16 07:21 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

    I coat both sides of the gasket with grease prior to installation. It could very well be the pan holes are warped too.

    -- Kane
    --
    Blossom II - '91 745Ti/M46 ... Bubbles - '74 144GL/BW35 ... Buttercup - '86 245GL/AW70 ... The Wayback Machine - '64 P220/M40







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.