Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230K - problems running when warm 200

posted by  Malnitz on  Wed Mar 30 20:06 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 16 08:02 CST 2010
[RELATED]

Hi,

I have a B230K (300.000 miles) which has problems running when warm. It starts every time when cold and after 20 minutes of driving the engine starts to run badly, as if one cylinder is not used. Usually I can make it run for 5 minutes longer when pulling the chocke a little (then It will not stop when ideling). But then there is nothing to do even standing on the speeder does not help, and I must stop. After 5 minutes the engine starts again as if nothing had happened.

I have replaced the crank position sensor (http://www.brickboard.com/FAQ/700-900/EngineSensors.htm#Crank_Postition_Sensor) as I have read that I starts to fail after a lot of miles.

However, I still have the problem. Does any body have an idear about what can be the problem ?

Malnitz






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230K - problems running when warm [200]
posted by  Malnitz  on Wed Mar 30 20:06 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.