Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Calipers -- pin heads 200 1989

posted by  guYom on  Sat Nov 19 14:20 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 5 17:35 CST 2013
[RELATED]

I recently did my front brakes and thanks to Brickboarders it went very well.

One thing though, I couldn't remember which way the pin heads were facing before I started, so I looked at both Haynes and Bentley in the middle of my second side, and in the pictures they go one way in one manual and the other way in the other one as far as I can tell.

Does it matter if the pin head is in the inside of the caliper or the outside ?

I decided to place the pin heads inside...

Unfortunately I was already on my second side when this occured to me, so I couldn't refer to the first caliper.

All my pin heads are on the inside.

Just curious if it makes a difference.

Thanks.
--
'89 244DL M47 169K miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Calipers -- pin heads [200][1989]
posted by  guYom  on Sat Nov 19 14:20 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.