Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2012 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

help installing polyurethane cone bushings on 95 940 900 1995

posted by  someone claiming to be miracleman49 on  Tue Nov 22 13:34 CST 2005 [RELATED]

hey all,

bought some longer bolts to fit the larger poly cone bushing on the front end of the radius rod. Believe torque specs are 88 ft lbs for rear bushing nut and bolt of radius rod, and 66 ft lbs for the front bolt of the radius rod. Rear nut and bolt torqued to 88 ft lbs with no problem, but front bolt seemed like it just wanted to continue squishing the poly bushing.... I could not get the torque wrench to "click", until I finally lowered the setting to 40 ft lbs??

I believe the bolt is secure, and I did use blue loctite.

Did anyone have this happen before? Any advice or recommendations?

thanks in advance,

Dennis






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New help installing polyurethane cone bushings on 95 940 [900][1995]
posted by  someone claiming to be miracleman49  on Tue Nov 22 13:34 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.