Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Power windows - checked voltages at switch, none apparent. 700 1990

posted by  squeaks on  Tue Dec 20 11:55 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Feb 19 20:10 CST 2008
[RELATED]

My 2 rear windows are not working through either the driver's control or the door controls themselves. I removed one door panel and disconnected the switch harness (which was difficult). I tried to measure for voltage availabe to the switch, but found none. I've found information that the power windows all have connections through the driver's side switch. Would this cause there not to be 12V available to the switch? If so, I'll risk removing driver's door panel.

My guess is the driver's switch would be normally closed so that all other window switches work, but if the driver presses the switch, then switch would be open to prevent a short. So I should find 12V at the other switches.

If anyone has archived links about the pins on the switches or anything, I'd love that too.

Thanks,
Nathan
--
'86, '89, '90 740s RIP '84 240






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Power windows - checked voltages at switch, none apparent. [700][1990]
posted by  squeaks  on Tue Dec 20 11:55 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.