Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stripped cam cover bolts. 900

posted by  RWD forever! on  Sun Aug 20 08:35 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 6 02:21 CST 2010
[RELATED]

Anyone have experience with stripped cam cover bolts on the 960?. This engine was rebuilt due to the porous block problem and a number of the cover bolts were stripped. The car works fine but oil is continuously filling the indentations under the plug cover and spilling down onto the exhaust. Very annoying and smelly. I am wondering if the cover can be removed and helicoils installed. One Volvo shop here in Edmonton implied that there isn't enough space to bore out the hole for the coils. Any easy (or difficult for that matter) fixes?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stripped cam cover bolts. [900]
posted by  RWD forever!  on Sun Aug 20 08:35 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.