Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

need help with 960 TDC 900

posted by  bgofaustin on  Mon Sep 25 00:42 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 22 03:57 CST 2011
[RELATED]

I just bought a car with a broken timing chain recently, the Previous Owner put a new belt and tensioner but its not getting any compression. I checked the TDC - The new TDC is about 6 teeth clockwise from the original white marks. If I put them at the white Marks as the manual says, my rod at #1 spark plug is not at its highest point. I put a red mark on this new TDC for my reference point.

I'm getting ready to remove the head section so which Marks should I use before the disassembly? Anyone who's done this before, please share your experiences on how I can make this job easier and cheaper.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New need help with 960 TDC [900]
posted by  bgofaustin  on Mon Sep 25 00:42 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.