Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Water Pump Install Idiocy (or Idiot!)! 91 240 200 1991

posted by  DHartlein on  Mon Sep 25 13:04 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 2 20:00 CST 2014
[RELATED]

OK - I put a new water pump on in addition to a whole bunch of other parts.....developed a very slight leak just 2" behind the top of the pump where the head and block meet. Decided to replace the pump gaskets as opposed to the head gasket as my install was the likely culprit. Proved myself right a couple of times over.

First, I found I left the original gasket in the hole for the heater tube, and installed the new one. No leak, but looked kind of "not right"! I removed them both and put the new gasket in the hole. Just one this time.

Started it up and coolant is running out near the heater tube like a faucet. How should the gasket on this thing be installed? Does it go over the tube? After screwing it up the first time, I have little to go by. Haynes and Bentley are silent best I can tell.

Love to figure out a way to do this without pulling the pump again and investing in my third gasket set!

Thanks for the help!

Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Water Pump Install Idiocy (or Idiot!)! 91 240 [200][1991]
posted by  DHartlein  on Mon Sep 25 13:04 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.