Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Temp Sensor Thermal Switch Question 91 240 200 1991

posted by  DHartlein on  Mon Nov 13 04:41 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 2 20:00 CST 2014
[RELATED]

I broke the fastener that connects the harness to the Engine Temperature Sensor (Thermal Switch). I used spade connectors to wire in extra wiring, and left enough excess so that if I had accidentally reversed the wires it would be easy to fix. I did my best to get them right.

Farm Boy's post on the same sensor got me looking at:

http://vlvworld.com/indexframe.html?VolvoRepairManual/Section_2_5.htm

Is it possible to wire the sensor in reversed, or is it simply a loop with resitance the factor that makes adjustments in the ECU? The car seems to be running fine, hot and cold.

Thanks

Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine Temp Sensor Thermal Switch Question 91 240 [200][1991]
posted by  DHartlein  on Mon Nov 13 04:41 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.