Anyone put remote start in there Brick? I am installing one now.
The r/s is made by Autostart. I beleive all wiring is the same.
Lots of wires. Most I do not need. alarm, keyless entry, trunk etc.
I just need the main 5 pin harness and some the secondary harness (hood switch, Parking light wire, brake light, tach)

The main 5-6 pin:
2 + feed wires. I connected right to battery
1 powers on the heater the other does the starter and run circuit.

The install wiring is vague but mentions some cars have two run positions and may need additional wiring to operate. Volvo has 2 run postions. ACC 1 does heater and wipers, etc and run 2 does the rest.

Questions
1) Do I need power both acc wires in order to make this work?
I would probably have to wire in a relay so i do not cross wire the ignition. I beleive the wires are Blue and Blue/yellow at the ignition.

2) does Volvo "having all the lights on the day running light" circuit mess with the controller somehow?





--
91 Brick turning 400,000 this month