Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ECT valve? Does it need a gasket here? 700

posted by  Andrew in AL on  Fri Jun 1 13:53 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:17 CST 2014
[RELATED]

I am not sure if it is the ECT, as I cannot find anything turbo related in the new reworked 700/900 FAQ's...but please help. This is an 89 760 B230T / Garrett turbo. The valve in question is right in front of the #1 plug.

There are two openings on this valve, one straight down that connects to the 'U' hose, and then one at the back of the valve - toward the #1 plug - with a connection for the straight short hose on the other side of the bracket..

The two star headed bolts that hold this valve to the main bracket came loose, and it does not look to have ever had a gasket there, but just wanted to make sure.

Thanks for any and all help..
--
' Of all bad men religious bad men are the worst. '' (C S Lewis ; on Evil Men) 89 764 (158K), '94 940T (240K), 85 245 (219K)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ECT valve? Does it need a gasket here? [700]
posted by  Andrew in AL subscriber  on Fri Jun 1 13:53 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.