Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to undo fuel rail fitting without damage? 200 1984

posted by  Dasein on  Sun Jun 24 03:01 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 18 00:34 CST 2011
[RELATED]

I searched around and looked on the FAQ but couldn't find any specific tips about how to disconnect the fuel line from the fuel rail on the B23X engine, other than "be careful not to twist the metal fuel line." I have done my best to follow this advice, used flare nut wrenches, penetrating oil, etc., but I cannot begin to break this fitting loose without starting to twist the line. I've put some serious pressure on it, and the fitting just won't snap. Any tips from your experience with this fitting would be greatly appreciated.

John,
84 & 86 245s






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED How to undo fuel rail fitting without damage? [200][1984]
posted by  Dasein  on Sun Jun 24 03:01 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.