Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AW72 - M46 Conversion question 900 1995

posted by  someone claiming to be Roj on  Sun Dec 30 08:48 CST 2007 [RELATED]


I'm in the process of converting my '95 940T from automatic to manual and I've run into a bit of a snag. I took the brake/clutch pedal cluster from an older 740 and the brake light sensor switch from the 740 is quite different from the one in the 940. The 740 one has two wire terminals on it wheras the 940 one has 4 and it's a different shape (square vs round) so won't fit in the hole on the 740 cluster.

I'm assuming that two of the wires going into the 940 switch are for the brake lights and the other two are for the computer system. Is that correct ?

If so, can I hook up the other two wires to the 740 switch and short the two computer wires together so the computer thinks it's ok and doesn't turn on some dash warning light ?

Thanks,

Roger






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AW72 - M46 Conversion question [900][1995]
posted by  someone claiming to be Roj  on Sun Dec 30 08:48 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.