Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

OD Gasket on M41 type J 1800 1972

posted by  73 1800ES on  Sun Mar 2 18:40 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 4 15:04 CST 2014
[RELATED]

Just finished pulling a M41 out of a 72ES. I wanted to put a new gasket where the OD meets with the transmission adaptor and that's where my problem started..... after removing the shift box from the top of the transmission and then the 10 mounting nuts I was able to separate the two by only an 1/8". The book I'm using says it should just pull apart so I must be doing something wrong. I can turn the OD to the left and right and it hits on the bolt studs so there is some play but nothing I do gives me more play away from the transmission. Any ideas will be appreciated. The #s off the OD are SN 25/115622/013473 and it is a Laycock OD type J. Thanks for reading my Post, Howard H






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OD Gasket on M41 type J [1800][1972]
posted by  73 1800ES  on Sun Mar 2 18:40 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.