Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust/Cat. Questions 900 1992

posted by  mmal231294 on  Tue Aug 19 02:08 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Mar 18 12:34 CST 2011
[RELATED]

HI
One of the three bolts that squeeze the flange at the front(engine side) of the cat converter has rusted thru. This now allows a small hiss of exhaust prior to cat. I tried to remove and replace last night but quickly found that P.O. had welded the head of the bolts to the flange, cant imagine why. Nice thick bead too so I couldnt dremel them off. If I take it to a muffler or weld shop do you think they could heat up and remove? And a second question which leads into my third question, 2)Is the front part of the flange actually part of the downpipe, 3)should I just replace the cat.(184,000miles). The flange is in fairly poor shape(rust) and I am concerned that if I try to replace cat. and it turns out that the front part of the flange is actually part of the downpipe(kinda looks like it must be) then I'd be stuck replacing it too?
Thanks
Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Exhaust/Cat. Questions [900][1992]
posted by  mmal231294  on Tue Aug 19 02:08 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.