Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

transmission tail bushing question 700

So I got this 760 1986 that it's been a while I am working whenever I have time, I should have probably never bought it or scrapped it
. Right now the transmission (automatic) is out of the car so I can replace the main rear seal and also the seal and bushing on the transmission. I removed the rear housing from the transmission so I can have access to the bushing. Should the oil hole on the bushing align with one of the recess on the housing? If so I don't think that was the case.
Anyways, the main question is the following: Should there be any movement on the shaft of the transmission? The one that goes through the bushing. There is a bit of play right now and a little knock you can hear when wiggling the axle. That is with the housing removed


Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New transmission tail bushing question [700]
posted by  someone claiming to be shrike  on Sat Jan 10 11:43 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.