Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Speedometer Sender in Differential Cover 200 1990

posted by  DougC on  Sun Jan 11 14:32 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

The speedometer and odometer stopped working on my daughter's 1990 245. Following the Bentley manual, we found that the speedometer sender in the differential is bad. Bentley says we might need new shims to adjust the clearance between the sender and the impulse wheel. You guys that have done this repair: Did you end up needing new shims? Or do the new senders usually set up properly with the old shims? My daughter lives in a different city, and I'm not sure which size shims, if any, to tell her to buy with the sender.
--
Thanks for all the help. DougC 1981 242, IPD bars and Turbo wheels, M46 :::::::::::::::::: 1993 245, B230 NA L-Block, M47, Turbo bars::::::::::::1984 760, B23FT, M46, waiting to donate engine to 242






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Speedometer Sender in Differential Cover [200][1990]
posted by  DougC  on Sun Jan 11 14:32 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.