Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bolts that hold the fan/clutch assy, belt pulley and, and water pump too long? 200

posted by  someone claiming to be dave on  Sun Mar 8 11:01 CST 2009 [RELATED]

I'm at the last stages of getting my water pump job finished. All I have to do is bolt the fan/clutch flange and belt pulley to the round water pump flange.

But something I can't figure out: the (4) 10 mm bolts (x 28ish mm long) that secure the 3 items together, are too long for me to put between the back face of the clutch and the back side off the round clutch flange (when the bolt head will rest.) The length is much longer than the distance between the back face of the clutch and the back side of the round clutch flange. I can't get them started.

Do I somehow have the wrong length of bolt (10mm x 1 1/8" long) or am I overlooking something?

Thanks in advance!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bolts that hold the fan/clutch assy, belt pulley and, and water pump too long? [200]
posted by  someone claiming to be dave  on Sun Mar 8 11:01 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.