Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2009

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

"Bedding In' brake pads

posted by  Farm Boy on  Fri May 22 17:03 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 28 07:35 CST 2013
[RELATED]

I just got a Tech Tip email from Zeckhausen Racing (the place where I got the most recent set of brake pads for my brick) detailing the procedure for bedding in brake pads.

I have been putting pads on cars since disk brakes were invented, and I have ONLY bedded in pads if there were instructions in the box telling me to do so. I have never noticed any difference between the ones I bedded in and the ones I did not.

These instructions indicate that ALL brake pads should be bedded in.

What say the bricksters? Do all disk brake pads need to be bedded in properly or is this unnecessary in most/all cases?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New &quot;Bedding In' brake pads
posted by  Farm Boy  on Fri May 22 17:03 CST 2009 >
  • New Yes, but...
    posted by  sdewolfe subscriber  on Fri May 22 23:50 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.