Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil Sending Unit Wire Broken 200 1985

posted by  newmex999 on  Sat Jul 18 10:09 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 21 09:05 CST 2014
[RELATED]

I noticed that the wire broke off the top of the oil sending unit on my 85 240DL(I think that's what it is, it is located directly forward of the oil filter coming out of the engine block). The wire broke off inside the harness that also contains a couple of wires from the alternator. I would like to run a new wire from the sending unit to ????. Where can I splice the new wire?

Thanks
--
1992 240GL, 1985 240DL Wagon, 1983 240DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Sending Unit Wire Broken [200][1985]
posted by  newmex999 subscriber  on Sat Jul 18 10:09 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.