Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B20E suggestions 140-160

posted by  rawits on  Sat Aug 8 12:13 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 3 12:32 CST 2014
[RELATED]

Cylinder Head Volume (cc) Cylinder Head Vol
(cubic in.) 02.684
Piston Head Volume (cc) Piston Head Vol
(cubic in.) 00.000
Gasket Thickness (in.) Swept Volume
(cubic in.) 31.003
Gasket Bore (in.) T.D.C. Volume
(cubic in.) 03.031
Cylinder Bore Diameter (in.) Gasket Volume
(cubic in.) 00.347
Deck Clearance (in.)
Note: Neg. nubmer above deck, Pos. number below deck Deck Volume
(cubic in.) 00.000
Stroke (in.) STATIC COMPRESSION RATIO 11.229

Post porting data as "bubbled"...

Do I run it???

.040 over, balanced, 274 deg cam, .426 lift, dual v/springs, SBC lifters, Isky p/rods, dual Mikuni's...

I have an "F" head available, but currently stock, and in need of rebuild.

Ron
Sonoma





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20E suggestions [140-160]
posted by  rawits  on Sat Aug 8 12:13 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.