Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tail lamp issue-1991 240 Wagon--Fuse 16 200 1991

posted by  Gemfire on  Sun Nov 8 08:18 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 11 11:28 CST 2014
[RELATED]

have a 1991 249 Wagon and fuse 16, (passenger tail light and front corner lamp) keeps blowing. I have a CIBE lamp and it is quite melted at that socket, so I switched in with a CIBE lamp from my other wagon, '85 245). But still the fuse blows immediately when the light switch is turned on.

Can I just run a ground from one terminal and then connect a jumper wire from the fuse 16 spade all the way to the connector on the tail lamp?

I need this car to get to work without the hassle from the police, and so I don't mind a quick work-around, however crude if it buys me time to figure out what is going on.
I have checked all ground connections and they all look good.

Thanks for your help!


Mike





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tail lamp issue-1991 240 Wagon--Fuse 16 [200][1991]
posted by  Gemfire  on Sun Nov 8 08:18 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.