Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

On a more serious note - oil breather 120-130 1967

posted by  KlausC on  Thu Apr 1 10:08 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

I have a Weber carb with a B18. I installed a PCV valve (correct version) and routed the hose to the intake area on the right side of the carb. An air intake hose is routed from the air filter to the top of the oil filler cap. At idle, all appears to be well. I get vacuum at the air cleaner end so that air is being drawn through the system correctly.

But, I am pushing oil out of the dipstick. About 1 quart of oil per tank of gasoline.

When I rev up the engine, there appears to be too much vacuum and the PCV valve closes. That seems to be the initial problem.

Did I install the valve upside down???

I just got my engine degreased, otherwise I would have never found the problem existed. And now, I would like to keep what little red is exposed on the block red.

Thanks,
Klaus

--
Praying for Cynthia Amendt, heaven bound






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New On a more serious note - oil breather [120-130][1967]
posted by  KlausC subscriber  on Thu Apr 1 10:08 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.