Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clutch placing? 200 1985

posted by  Shaughnessy on  Sat Apr 24 09:41 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 23:53 CST 2014
[RELATED]

I FINALLY got my RMS in...

now I'm doing the clutch. I have the flywheel on, and I was in the process of putting the clutch on...but I was confused by the instructions in the bentley. .

It seemed to imply the "larger" side of the clutch plate face away from the flywheel, and thus the part that sticks out faces towards the flywheel.

But when I put it on the flywheel, the parts that sticks out would hit the bolts that keep the flywheel on the engine.

Am I missreading the "larger" side of the clutch?

http://www.swedishautoparts.com/shop/catimages/Volvo-Clutch-Kit-271267.jpg

This picture shows the part I'm talking about. I took it as the smaller of the two sides (diameter wise)...but if I placed it facing out (towards the back of the car), it would make so much more sense.

Does that part of the clutch face the back of the engine?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Clutch placing? [200][1985]
posted by  Shaughnessy  on Sat Apr 24 09:41 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.