Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2016 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Shocks for the 444 444-544

Now driving the 444 "project". My plan to use the best of the shocks I found between the project car and parts car is not going to work. Way too much bouncing.

As I remember, in 2005 when I did the suspension there were quite a few shocks choices available (Koni, KYB, Bilstein, Monroe, Boge). Now the choices appear to be fewer. Based on comments in the archives here and internet research I'm leaning toward KYB GR2s for the rear (several sources at $20 each) and Monroe for the front (VP Autoparts at $60 each). The alternative seems to be Bilstein from Skandix at 3X-4X the $.

Would appreciate comments from any of you with experience on this. Are the Bilsteins really worth the extra dollars? Are there better choices I'm missing?

Thanks,

Keith

Milan, IL 444 project.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Shocks for the 444 [444-544]
posted by  KeithJ  on Sun Apr 25 07:38 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.