Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Advice (behind dashboard) on installing a new wiper motor? 200 1984

posted by  Ken C on  Mon May 3 07:47 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:39 CST 2014
[RELATED]

Hi all.
I'm about to install a replacement windshield wiper motor (it should be delivered later today) on my 1984 240.
The installation on the engine side of the firewall seems obvious, but I'm soliciting advice (including pictures) of what to do on the passenger compartment side (besides removing the glovebox for access), where the shaft attaches to the wiper linkage.
Any advice, tips to make it easier, etc., on how to remove and later reinstall the shaft on the pulley and linkage is appreciated -- I'm particularly concerned not to mess up the positions of the pulley system, as well as any other things that I haven't even anticipated.
In advance, thanks.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Advice (behind dashboard) on installing a new wiper motor? [200][1984]
posted by  Ken C subscriber  on Mon May 3 07:47 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.