Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

advice 200 1985

posted by  ut-vol on  Sun May 23 14:36 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 24 11:40 CST 2010
[RELATED]

Hello need advice , Im the proud owner of a 1985 240 GL and it has about 275,000 miles, im wanting to keep it and have decided to go to junk yard (pull a part) and get a cylinder head for the 2.3 engine, and this way I would be able to drive the car while the machine shop is redoing the valves and such then after the head is done I would simply swap the head out. Were I need advice is on finding out what I can do and what the machine shop can do that I cannot or do not have the special tools to do. Help in the way of good web sites and perhaps parts houses. Thanks jim and the owner of a VOLvo here in Knoxville,tn YES!!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New advice [200][1985]
posted by  ut-vol  on Sun May 23 14:36 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.