Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No voltage at red/white wire at power stage - no start - what next 700 1990

I am stuck trying to get my 760 turbo wagon to start. Sometimes it does some times it doesn't. I have intermittent no spark. I followed the diagnostics back to the power stage. I used alldata and the stepbystep volvo site for info. I actually thought that the powerstage was the problem. To check it, I took it out and swapped it in my running 240. It worked fine in the 240. So I guess it is not the power stage. I measure 12v at the red/white wire at the back of the powerstage on the running 240 but get nothing at the 760. Not sure what to do next. Any ideas. Should I just change out the ballast resistor, not sure what it does. Help, driving me nuts.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No voltage at red/white wire at power stage - no start - what next [700][1990]
posted by  JayTexas  on Mon Sep 6 10:19 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.