Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2017 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Camshaft gear clearance question 120-130

posted by  nictalope on  Mon Nov 15 05:49 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 11 21:19 CST 2014
[RELATED]

I was able to assemble most of the engine yesterday, although I have some doubts on the timing gears. I put the gear on and then the big nut, tried to rotate the assembly, no go. I pushed out the gear a bit and now everything moves freely, so, there must be a play dialed in between the back of the gear and the retaining plate. And, wouldn't that dissapear when you tighten the nut to the spec?
Thank you.
I have a pic here with the key partway in at the nose.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Camshaft gear clearance question [120-130]
posted by  nictalope subscriber  on Mon Nov 15 05:49 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.