Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

volume of fuel pumped to engine bay fuel distributor 200 1993

posted by  1fatcat on  Fri Jan 14 12:51 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 7 14:13 CST 2011
[RELATED]

I just wanted readers to be aware of this tidbit. I was curious as to the quantity of fuel being delivered to engine. I noted a male/female junction at fuel block
I loosened took the delivery end, one receiving fuel and slide into a 16oz. M-T
coke bottle I'd finished with. Jumped the #4 fuse to the #7 fuse (this energizes BOTH FUEL PUMPS In about 30 seconds my coke bottle was on the verge of over flowing bottle PLASTIC, This told me OK bud your receiving plenty of fuel to injectors. This is my way of diagnosing what works & what doesn't work. good luck






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New volume of fuel pumped to engine bay fuel distributor [200][1993]
posted by  1fatcat  on Fri Jan 14 12:51 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.