Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AMM issue/questions 200

posted by  Swedespeed240 on  Wed Feb 2 10:12 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 26 10:13 CST 2012
[RELATED]

Just dropped plenty of $$$ getting car up to snuff and all of a sudden last night, CE light came on with code 1-2-1 (AMM malfunction/signal missing). Car was all over the place - Idle was way high, way low and very erratic. Car would start but as soon as I hit the gas, it would stall immediately. I had the car pushed on the ice (we live in Rhode Island) to a safe place where I removed the AMM, cleaned it with the MAF cleaner and reinstalled it. Removed fuse #6 to clear codes.

Car started right up and drove perfectly... Anyone else ever have this issue? I am picking up a used AMM for $60 since rebuilt units BEGIN at $200.

Any thoughts???

Thanks!
--
Spencer 1992 244 200K : Bosch LH 2.4 Jetronic FI






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AMM issue/questions [200]
posted by  Swedespeed240  on Wed Feb 2 10:12 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.