Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1992 EGR engine in a 1993 240 200 1993

posted by  Tomstoo on  Sat Feb 12 10:20 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:33 CST 2014
[RELATED]

I just put a 1992 engine in my 1993 240. When completing the wiring harness hook up, I found that the connectors under the dash do not match up, the 93 harness has a long flat connector, the 1992 harness has a square connector. I now understand that the 1992 engine has an EGR system, while the 1993 did not.

So How to proceed? Do I just match up wire colors and splice the 93 connector the 92 harness? I have found a 93 wiring diagram on the web, but have been unable to locate a 92 w EGR wiring diagram.

In the engine compartment I have 3 extra connectors on the 92 harness, what is the best way to determine there function?


I appreciate your advise and insight.

Thanks,

Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1992 EGR engine in a 1993 240 [200][1993]
posted by  Tomstoo  on Sat Feb 12 10:20 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.