Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fixing windshield wiper switch 200

posted by  Jake123 on  Mon Mar 14 05:46 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 8 07:13 CST 2013
[RELATED]

We are having a problem with the low setting of our windshield wipers on the 1989 240 with 140k miles. It sometimes works but most of the time a little pressure down on the wiper switch makes it work. This tells me the switch isn't making proper contact. So I took out the switch only to find that the assembly is riveted together. Is it possible to take the switch apart and get it back together again? A new switch on IPD is $82 but if I could get the switch apart I know I could just solder a small piece of copper inside so the low setting makes the proper contact.

I think I might just drill out the rivets and replace with nuts and bolts so I can fix it.

Or... can I swap 2 wires so the high and low settings are reversed? I never use the high setting so having intermittant and low would be better than only having intermittant and high available.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fixing windshield wiper switch [200]
posted by  Jake123  on Mon Mar 14 05:46 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.