Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Crank Position Sensor cable 200 1992

posted by  cn52x5hg on  Fri Apr 29 11:37 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 11 17:37 CST 2013
[RELATED]

The cable/connector on my CPS has been dying for years. When the car won't start I pop the hood and give it a little jostle and it reliably starts right up. I suspect the fault is where the sensor cable and its connector mate up. This used to happen maybe once every month or two, however lately its happening too frequently for my liking.

I have heard replacing the CPS is not an easy task and that a failed job can result in having to remove the tranny. I have no reason to believe my CPS is bad, just the connector, and therefore I just want to splice in a working connector. Before heading out to the junkyard in search of a new connector to splice in as a replacement I was wondering how common this particular connector is across different models (740s) and vintages?

If anyone has a failed CPS with cable laying around I'd gladly pay shipping for it.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crank Position Sensor cable [200][1992]
posted by  cn52x5hg subscriber  on Fri Apr 29 11:37 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.