Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PCV Oil Seperator return tube broken! 900

posted by  drj434343 on  Sat Apr 21 15:59 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 24 09:46 CST 2013
[RELATED]

Everyone,

I took apart my wife's '94 940 turbo today to replace its PCV system. We removed the oil separator box and attempted to replace the small drain hose. Unfortunately this hose broke off in the middle and now we cannot remove the lower portion. We can grab the hose with a long flexible "grabber" tool but cannot apply enough force to remove the remaining section of the tube. Any tips on how to remove this (besides dropping the oil pan)? Any danger in taking the new tube, cutting off the long part and using just the top lip to seal against the new separator box? Obviously the oil dripping from the separator box will not travel all the way down to the pan but I am hoping this will be OK.

Thanks in Advance!
Brian






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PCV Oil Seperator return tube broken! [900]
posted by  drj434343 subscriber  on Sat Apr 21 15:59 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.